Don’t you hate it when the effect of heat and mirage comes in as a barrier between you and your target while shooting? When you use a suppressor, the heat builds up more quickly, and the situation is further worsened. If you are one of those frustrated shooters and looking for ways to put out the blazing heat (literally), you must be questing for the best suppressor covers, and if that is the case, this article is for you!
Suppressor covers are a convenient and effective way of dealing with these situations. If not eliminated, suppressor covers help in holding in the temperature for a longer time, postponing mirage’s effects in the process. With suppressor covers, be sure that you will be able to settle in for a few more rounds before mirage sets in.
While suppressor covers are instrumental, it is also crucial in making sure that the quality is good enough to handle the heat. Therefore, this article will guide you through the best Suppressor Covers to help you make a better choice.
Table of Contents
Best Suppressor Cover Reviews
1.Burn Proof Gear Suppressor Cover – Heavy
The Burn Proof Gear Suppressor is a good choice if you are into rough shooting yet want a smoother shooting session. These covers are suitable for rifles of length ranging from 5” to 8.5” with a diameter of 1.5”. They are designed with internal thermal fiberglass covering that can bear up to 2000 degrees Fahrenheit and an outer Kevlar/Nomex cover that can take up to 1000 degrees Fahrenheit. This makes the covers 100% fire redundant and helps combat the effects of dramatic mirage, heat, and IR in shooting in the dark.
Furthermore, these covers are only 4.5 ounces, so you do not have to be worried about carrying any extra weight. The Burn Proof Gear Suppressor covers are designed to sustain heavy-duty shooting without them sliding off your rifles.
Additionally, the covers are machine washable, so you can get them cleaned and not have the fabric wear off. And as a bonus, these covers come in unique, patented designs, which are absolutely classy and bold.
- The Burn Proof Gear Covers are effective at keeping the heat contained.
- The inner fiberglass sleeves and outer cover provides good thermal protection.
- Both the inner and outer cover can bear high temperatures.
- Excellent Customer Service
- Long-lasting and durable
- The inner sleeve might not be sufficient in length, usually not a big deal, but it might expose the can’s outer covering.
- It might be a little more costly than other suppressor covers.
2. Rifles Only Gear MAD Suppressor Cover
These Rifles Only Gear MAD Suppressor Covers are a little more versatile in terms of size. They can conveniently fit lengths of 6”, 7.5”, 8”, 8.5”, 9” and 10” while they can fit diameters ranging from 1.5” to 1.75”. This particular cover also comes in two-part covers. The inner cover can take up to as high as 3000 degrees Fahrenheit. On the other hand, the outer cover can be interchanged as per the environment and your mood!
If not as light as the Burn-Proof Gear Covers, these covers are only 8 ounces. However, these MAD covers are not suitable for semi-automatic, rapid-fire, and full-auto fire operations, and the HAD covers are more appropriate for those.
On the brighter side, there are plenty of colors to choose from. You can make your choice between Multicam, Kryptec Highland, Coyote Brown, OD Green, Black, and Atacs.
NOTE: Not suitable for high shooting
- Easy to install and put it on and off
- Minimizes mirage so you can go for more rounds
- Manipulates the suppressor a short-time after shooting
- Better lacing system
- It fits the cans perfectly.
- It tends to slide a little and requires keeping an eye on it.
- The parachute chord might be subject to melting after a moderate rate of fires on rare occasions.
3. SilencerCo SCOAC1740 Suppressor Cover
If you are looking for a quality Suppressor Cover at a moderately lower price, the SilencerCo Scow Suppressor cover is the one for you. Even though they are a little heavy compared to other Suppressor covers, they do their mitigating mirage well.
These Suppressor Covers can fit perfectly to any length and diameter with three adjustable straps. The outer nylon cover and metal strap buckles of this cover make it highly fire and water-resistant. Although they do not come with a dual part cover, they function well to keep the heat low and save you from burns.
Even though there is no other color apart from Grey to choose from, the design is attractive to compensate for that.
- Works well unless you operate for exceedingly long periods
- Greatly reduces mirage
- Easy installation if the instruction is followed
- It might smoke up in case of rapid firing
4. Cole-TAC HTP Suppressor Cover
The HTTP or High-Temperature Covers from Cole-TAC are a real value for money, a product you can completely rely on. Made in the United States, these covers come with BOA straps that are adjustable to diameters between 1.375” to 1.625”, would keep the cover away from shifting, and would not loosen or wear off with time. They come in two sizes in terms of length – 6” and 7.5”.
These covers are made of three different layers. The first or outer layer is made of high quality 1000 Denier Cordura Nylon that is durable and water, and fire-resistant. This layer would not let the cover fade, rot even in aggressive environments. The middle layer can bear up to 1800 degrees Fahrenheit, and the innermost layer is made of woven fiberglass coated by high-temperature silicone that can take 3000 degrees Fahrenheit of heat.
This product is also handy if you are into rapid-firing or frequently shift from rifle to pistol. The covers keep the can from falling off during these activities, and so there is no chance that you are left burning.
- Priced at almost half of the other quality suppressors
- The outer shell stays in place.
- Allows more rounds and rapid shooting
- Unique designs to choose from
- Limited length sizes.
5. Cole-TAC Metal Python Suppressor Cover
Another top product by Cole-TAC, these Metal Python Covers, are as good as the HTP ones. These covers have adjustable BOA straps, too, accompanied by stainless steel metal buckles. These covers can conveniently fit diameters ranging from 1.375” to 1.625” and can be 6” or 7.5” long.
The metal Python Covers are made of two layers. The inner layer can sustain 1800 degrees Fahrenheit of temperature, while the outer shell, like the HTP model, is made of high-quality nylon threads that are both fire and water-resistant. Besides, it weighs as low as 2.2 oz., which adds to the pluses.
However, these covers are not suitable for semi-auto or rapid firing. They are particularly designed bolt guns and precision style shooting. Therefore, in case you are opting for high rate shooting, this might not be for you.
- Stylish and durable
- A go-to option for low firing rates
- Less expensive
- It fully covers the gun
- It might slide forward with extensive firing.
6. EmersonGear Airsoft Suppressor Cover
Another one in the low-range category, the Airsoft Suppressor Covers by EmersonGear, comprises 500 Denier Cordura Nylon. They not only have elastic straps to tighten them around the can, but they also come with shock cords that help in securely holding it in its original position.
The Covers are 18cm in length and 4.5cm in width and can fit diameters of 1.77”. With a soft inner layer, you can be sure that the mirage’s effects would not bother you for a longer period. Also, high-quality sponge material helps keep noise minimal. However, that being the case, these covers are suitable for airsoft use only.
The good news is that there are almost 10 different color options available. Besides, the outer cover is separate from the inner sponge, and therefore in also interchangeable. Changing the covers take only a couple of seconds, so you can easily do so to fit the environment you are in.
- Great for Average Rates of fire
- It makes your guns look more tactical.
- Great value for money
- Fits the guns perfectly.
- Includes extra foam for smaller diameters
- Not suitable for a fully automatic rifle
- Includes 2 pieces.
7. Sub TAC Alpha Suppressor
The Alpha Suppressor Covers by Sub TAC will fit rifles that are up to 8 inches long. Its fully adjustable straps would help you install it on rifles with any diameters. In fact, in a regular kit, you would also find 8-foot long Parra cords and 3 strong cinch straps that make sure your cover does not move.
The Cover is made with high-temperature materials that can take up to 1800 degrees Fahrenheit.
- Keeps noise under control
- Well built and durable
- Fits any size perfectly
- Rubber bands might melt in rare cases.
8. IDOGEAR Airsoft Suppressor Cover
This amazing Suppressor Cover from IDOGEAR is suitable for airsoft use only. So, this makes a great choice if you want to go for hunting, combat, CS games, Shooting, and other such activities. There are shock straps that hold the cover tightly around the gun, and the adjustable shock cord further ensures a custom fit.
The cover’s outer part is made of excellent quality 500Denier nylon and has a Teflon coating, making it water-resistant. The inner part is made of a soft sponge that successfully eliminates mirage. These covers are durable, but the use of superior materials makes them comfortable for use. The cover would fit suppressors from 1.3” to1.75” in diameter and 7” in length.
On the plus side, the covers are constructed with high-quality Crye Precision MultiCam Webbing, giving them a high-end look. This also makes it perfect for maintaining camouflage. The product comes in four different colors, including MultiCam, MultiCam Black, Cayote brown, and black.
- Not costly and provides value for money
- Can be removed easily with one strap
- Withstands heat as well as other chemicals
- It fits perfectly and stays in position.
- Not yet found.
9. Rifles Only HAD Suppressor Cover
This is the HAD or Heat Abatement Device Suppressor Cover from Rifles Only. These covers are very similar to the MAD series by Rifles, Only covered earlier in construction. However, unlike the MAD covers, these HAD covers are suitable for rapid firing, semi-automatic, and automatic rifles.
The HAD cover is also available in different sizes, including 5”, 6”, 7”, 7.5”, 8”, 8.5”, 9”, and 10” and would cover all guns between diameter 1.3” to 2”. There are two parts, with the inner part is made of high-quality material that will take up to 3000 degrees Fahrenheit. The outer cover, on the other hand, can also sustain up to 2000 degrees Fahrenheit. If these were not good enough, the outer sleeves are also interchangeable, so you can change them during shooting sessions to match your surroundings. Proper installation would ensure that the product does not shift around.
- The Burn Proof Gear Covers are effective at keeping the heat contained.
- The inner fiberglass sleeves and outer cover provides good thermal protection.
- Both the inner and outer cover can bear high temperatures.
- Excellent Customer Service
- Long-lasting and durable
- The inner sleeve might not be sufficient in length, usually not a big deal, but it might expose the can’s outer covering.
- It might be a little more costly than other suppressor covers.
10. Magpul Suppressor Cover
This unique suppressor cover from Magpul is very different than the other covers in the market. These covers deal with the effects of mirage, but they also mitigate internal suppressor temperatures to safe levels, minimizing the retained heat. This makes it a great product to keep your suppressor safe for a longer period.
The inner part is made of stainless steel and has clamps that ensure a rigid and strong grip so that you can confidently go for extreme firing sessions and rough handling and be sure that the cover would not slip. Also, this makes it perfect for all sizes. The outer sleeve is made of high-temperature polymer that serves as a heat shield against as high as 1300 degrees Fahrenheit. There are absolutely no chances that the cover would melt. Rather, they would withstand brutal suppressor temperatures during extended periods of firing.
The Magpul Suppressor covers are solid, unlike the other covers that are wrapped around the suppressor. You will be able to get a nice medium Coyote tan color.
Pros
- Works as advertised and dissipates heat very well
- Allows very long shooting sessions
- There are gaps between the clamps and the cover, allowing airflow for cooling.
- Ensures precision
- Well-designed
Cons
- Is it a little difficult to uninstall since they are fastened with screws?
- A little bulky.
- Works as advertised and dissipates heat very well
- Allows very long shooting sessions
- There are gaps between the clamps and the cover, allowing airflow for cooling.
- Ensures precision
- Well-designed
- Is it a little difficult to uninstall since they are fastened with screws?
- A little bulky.
Factors to consider while buying the best Suppressor Cover
Now that you have gone through the suppressor cover reviews, this section aims to guide you through some factors you should consider before purchasing. First things first, it is important to know what to expect in your suppressor cover. Usually, Suppressor covers are made of two different parts, and each is equally important in ensuring that they function well. The inner part is made of fireproof materials like Nomex or Kevlar that contain the heat within. On the other hand, the outer jacket is made of synthetic fabric like nylon that secures the suppressor’s inner part. The outer sleeve may serve an additional purpose of camouflaging at times. There are definitely some exceptions. For instance, recent inventions like the covers by Magpul discussed earlier contain grip-able covers with different materials.
There are two factors that one must consider before buying a suppressor cover. The first one is the heat rating, and the second one is fit.
Heat Rating
Heat rating applies more to the suppressor cover’s inner part since they are responsible for sustaining the heat first. Since suppressors can become as hot as 1000 degrees, it is important to make sure that the cover can bear higher temperatures. Some covers can take up to as high as 3000 degrees. One would generally like to rely on a higher heat rating. However, there is a catch to it. The higher the rating, the bulkier the cover is likely to be since as the rating increases, so does the cover’s size. While heavy covers might be handy for some situations, if the extra weight bothers you, you might want to settle for a moderate heat rating.
Fit
To determine the size of the suppressor cover you are going to buy, you need to know your can’s length and diameter. Suppressor covers may come in a lot of different sizes, so finding the proper match is important. It is also safer to know that not all sizes proposed by the companies might be accurate. And if the cover does not fit perfectly, there are chances that it slides off or comes off, which can get it to melt. Some companies do claim that the covers can fit any size with adjustable cords. And then some covers have clamps. But it is still worth your while and money to make sure that you understand the dimensions well. Take your time, measure up, and consult the company before buying.
Frequently Asked Questions (FAQs)
What is a Suppressor Cover?
A suppressor cover, in simple words, is a handy accessory for your gun. Not to enhance its looks, even though they serve that purpose too, but to make your shooting experiences safe and effective. Let us break that down a little; suppressor covers are wrappers for your rifles and pistols that save you from the effects of heat that build up when you shoot and keep you safe from burns and scars. Suppressor Covers generally consist of two layers that are made of fire-resistant materials. For a typical Suppressor cover, you can also expect straps and buckles that help keep it in its place. Suppressor covers make sure you have a better shooting experience overall.
Why use a Suppressor Cover?
If you are this far into the article, you have probably already gotten familiar with the word ‘Mirage.’ Mirage is an optical phenomenon that is caused when light is bent due to the effects of heat. In the case of shooting, when we fire, heat builds up. If we have a suppressor installed, which works as a silencer for guns, we can casually expect the heat to be worse. This causes mirage, which is huge trouble while shooting where precision is the key to meeting targets. On top of that, the can might come off, leaving you with burns from that high a temperature. When the gun is covered with a Suppressor Cover, not only is the can be held in place, the heat too is contained within, which mitigates the effects of mirage, allowing you to settle for few more rounds.
How to use a Suppressor Cover?
Suppressor Covers are normally made of foldable materials allowing you to wrap it around your can. They either have built-in straps attached to the outer sleeve, long cords, or both. These straps help you fasten the cover on the can and keep it in position during shooting. The size of the straps normally determines the size of the diameter that it would fit. However, some straps are adjustable, and so are the cords. All you need to do is wrap the cover around and fasten the straps. Some covers are not foldable like the one by Magpul. You must slide the opening over the can and lock the screws to fasten it. But, you do not need to be worried about all these covers come with a much detailed installation manual.
Who makes the best Suppressor Covers?
When talking about Suppressor Covers, few names keep coming up. Since most product offerings in the Suppressor cover market is pretty similar, it is hard to pick a few names. However, some great Suppressor Cover makers include Rifles Only, Cole-TAC, Burn-Proof Gear, Magpul, Armageddon, etc. All these Covers can take up to high temperatures ensuring that mirage is mitigated and there are no chances of burns. Constructed with very similar materials, design, and color schemes, these covers are the shooters’ all-time favorite. Then there is the Magpul cover, with its unique design and materials, these covers do give something more to customers.
Final Verdict
An effortless accessory, Suppressor Covers is actually much needed. However, since you are to pay a considerable amount of money in acquiring these handy pieces, better make sure you buy a good-quality material that matches your needs, sizes, and budget.
Please bear in mind that not all suppressor covers might be suitable for all sorts of guns and, in the process, for all sorts of activities. Some covers might be more suitable for vigorous shooting, while others are for airsoft purposes only. Determine your goal before ordering.
We would personally recommend the Rifles Only HAD covers and the Magpul Covers to give real value for money. However, since there are many options available, browse through all the covers’ offerings and make a good addition to your kit.
